T-II-2new

Variational methods: Sound waves in solid and fluid materials

Elasticity in solids

Under the action of external forces a solid body moves. But it can also be deformed, i.e. it can change volume and shape. The first succesful attempt to describe this phenomenon is provided by the theory of elasticity. The theory is based on the assumptions that (1) the solid body can modeled as a continuum medium and (2) the energetic cost of the deformation is kept at the lowest order in perturbation. The fundamental equations of elasticity have been established by Cauchy and Poisson in the twenties of the 19th century, well before the discovery of the atomic structure of matter. An important experimental observation is that a sudden deformation induces small oscillations propagating in the material. Here we derive their equations of motion which describe how the sound propagate in solids.

The strain tensor

We consider a perfectly isotropic continuum medium and assume that at time $t=0$ a body is at rest and no external forces are applied. Each point of the body can be identified with its postion in the space:

${\vec {r}}=(x_{1}=x,x_{2}=y,x_{3}=z)$

Then a sudden deformation is applied and the point located in ${\vec {r}}$ moves to a new location ${\vec {r}}_{\text{new}}$ at time $t>0$ . The displacement, ${\vec {u}}={\vec {r}}_{\text{new}}-{\vec {r}}$, differs from point to point of the body and is then a function of the original position ${\vec {r}}$. The displacement vectorial field

${\vec {u}}({\vec {r}},t)=\left(u_{1}({\vec {r}},t),u_{2}({\vec {r}},t),u_{3}({\vec {r}},t)\right)$

encodes then all informations about the deformation of the body. However large displacements does not always correspond to large deformation as the body can move rigidly without deformation. To quantify how much a body is deformed we consider two points at an infinitesimal distance $d\ell$.

• Assuming small deformations, show that the distance $d\ell _{\text{new}}$ after the deformation can be written as:

$d\ell _{\text{new}}^{2}\approx d\ell ^{2}+2\sum _{i,k}\epsilon _{ik}dx_{i}dx_{k}$

The tensor $\epsilon _{ik}$ is called strain tensor, is symmetric and defined as

$\epsilon _{ik}={\frac {1}{2}}\left(\partial _{k}u_{i}+\partial _{i}u_{k}\right)\,,\quad {\text{with}}\;\partial _{k}={\frac {\partial }{\partial x_{k}}}\quad (1)$

• Consider now a volume element $dV=dx_{1}\,dx_{2}\,dx_{3}$ and show that at the first order in perturbation one has

$dV_{\text{new}}\approx dV\left(1+{\text{Tr}}(\epsilon )\right)\quad$

This means that the trace of the strain tensor, ${\text{Tr}}(\epsilon )={\text{div}}({\vec {u}})$, identifies with the relative change in volume $(dV_{\text{new}}-dV)/dV$ of the body. In general all deformation can be represented as the sum of a uniform compression (change in volume without change of shape) and a shear (change of shape without change of volume):

$\epsilon _{ik}=\left(\epsilon _{ik}-{\frac {1}{3}}\delta _{ik}{\text{Tr}}(\epsilon )\right)+{\frac {1}{3}}\delta _{ik}{\text{Tr}}(\epsilon )\quad {\text{with}}\quad \delta _{ik}={\begin{cases}0\;{\text{if}}\;i\neq k\\1\;{\text{if}}\;i=k\end{cases}}\quad (2)$

The first term is a shear as its trace is zero. The second term is a compression.

Energy considerations

The total energy of the body is given by the sum of the elastic and kinetic energy (the gravity is neglected). A body at rest, in abscence of external force and at thermal equilibrium does not display any deformation, this means that when the strain tensor is zero for all points, the potential energy displays a minimum. As a consequence for small deformations the first terms of the expansion of the potential energy must be quadratic in the strain tensor (elastic approximation). The more general quadratic form can be written as $\int d{\vec {r}}\sum _{ijkl}\epsilon _{ij}\,C_{ijkl}\,\epsilon _{kl}$, where the tensor $C_{ijkl}$ contains all the elastic moduli. For an isotropic material the energy cost should be frame independent and we can write a simpler quadratic form that we will discuss in class:

$E_{\text{el}}=\int d{\vec {r}}\left[{\frac {K}{2}}{\text{Tr}}(\epsilon )^{2}+\mu \sum _{ik}\left(\epsilon _{ik}-{\frac {1}{3}}\delta _{ik}{\text{Tr}}(\epsilon )\right)^{2}\right]$

The first term accounts for the cost of the change in volume, the second for the change of shape. The positive constants $K,\mu$ are respectively the bulk and the shear modulus and have dimensions of a pressure. These two constants are material dependent and fully describe its elastic properties.

The kinetic energy can then be written as

$T=\rho _{0}\int d{\vec {r}}\left({\dot {u}}_{1}^{2}({\vec {r}},t)+{\dot {u}}_{2}^{2}({\vec {r}},t)+{\dot {u}}_{3}^{2}({\vec {r}},t)\right)$

where $\rho _{0}$ is the mass density of the material at rest. Here used the fact that the mass contained in an infinitesimal volume around the point located in ${\vec {r}}$ is $\rho _{0}\,dV=\rho _{0}\,d{\vec {r}}$.

Equation of motion with the variational principle

• Show that the potential elastic energy can be re-written in the following form:

$E_{\text{el}}={\frac {1}{2}}\left(K-{\frac {2}{3}}\mu \right)\left(\sum _{l}\partial _{l}u_{l}\right)^{2}+{\frac {\mu }{4}}\sum _{l,m}(\partial _{l}u_{m}+\partial _{m}u_{l})^{2}$

The associated action is given by

$\int _{t_{1}}^{t_{2}}dt\int _{0}^{1}d{\vec {r}}\,{\mathcal {L}}$

where ${\mathcal {L}}$ is the Lagrangian density

• Write explicitly ${\mathcal {L}}={\mathcal {T}}_{\text{kin}}-{\mathcal {E}}_{\text{el}}$.
• Using the variational methods show that the equation of motion for a given component of the displacement $u_{i}({\vec {r}},t)$ writes

$\rho _{0}{\ddot {u}}_{i}=\sum _{k}{\frac {d}{dx_{i}}}{\frac {d}{d\partial _{i}u_{k}}}{\mathcal {E}}_{\text{el}}$

the 3 equations of motion for $u_{x}(x,t),u_{y}(x,t),u_{z}(x,t)$.

• Show that u_x(\vec r, t)Compute the longitudinal mode velocity and the transverse mode velocity.

• 

  Seismic waves recorded by a seismograph after an earthquake. Longitudinal waves are the quickest and for this reason called primary (P-waves), then arrive the transverse waves, for this reason called secondary (S-waves). Finally it's the turn of Rayleigh waves which are also solution of the D'Alembert equation but propagate only on the Earth surface. They are slower and less damped then bulk waves.

• 

  The time delay between the P and S waves grows with seismograph-epincenter distance. The measure of three independent seismographs allows thus to identify the location of the epicenter.

Elasticity in fluids

A fluid does not oppose a change in its shape with any internal resistance, but displays a finite energy cost to compression. Using the same reasoning used before we can write the Lagrangian density:

${\mathcal {L}}({\vec {r}},t)={\frac {\rho _{0}}{2}}{\dot {\vec {u}}}^{2}-{\frac {K}{2}}({\text{div}}({\vec {u}}))^{2}$

• Show that the associated equation of motion

$\rho _{\,}{\ddot {\vec {u}}}=K{\vec {\text{grad}}}\left({\text{div}}({\vec {u}})\right)$

During the oscillations the mass density can have small fluctuations

$\rho ({\vec {r}},t)=\rho _{0}+\delta \rho ({\vec {r}},t)=\rho _{0}\left(1+\sigma ({\vec {r}},t)\right)$

The scalar field $\sigma ({\vec {r}},t)$ represents the relative fluctuation of the density.

• Using the continuity equation of a fluid:

${\dot {\rho }}(r,t)=-\rho _{0}\,{\text{div}}({\dot {\vec {u}}}({\vec {r}},t))$

show that

$\sigma ({\vec {r}},t)=-{\text{div}}({\vec {u}}({\vec {r}},t))$

• Show that the previous equation of motion corresponds to the D'Alembert Equation for the scalar field $\sigma ({\vec {r}},t)$.

Conclude that the elastic field in fluids is scalar.

• 

  Men landed on the Moon 50 years ago, but a Journey to the Center of the Earth remains science fiction. The deepest artificial holes go only 12 km into the Earth's crust.

• 

  The chemical-physical structure of the 6000 km of our planet are known by the trip reports of seismic waves. For example we know the core is fluid as secondary waves cannot travel deeper than 3000 Km.

Sound speed in perfect gas

Generally speaking, a sound wave in an ideal gas oscillates sufficiently rapidly that heat is unable to flow fast enough to smooth out any temperature perturbations generated by the wave. Under these circumstances, the gas obeys the adiabatic gas law,

$PV^{\gamma }=$ constant

where $\gamma$ the ratio of specific heats (i.e., the ratio of the gas's specific heat at constant pressure to its specific heat at constant volume). This ratio is approximately $1.4$ for ordinary air.

• Show that the Lagrangian density writes

${\mathcal {L}}({\vec {r}},t)={\frac {\rho _{0}}{2}}{\dot {\vec {u}}}^{2}+P_{0}{\vec {\nabla }}\cdot {\vec {u}}-{\frac {\gamma }{2}}P_{0}({\vec {\nabla }}\cdot {\vec {u}})^{2}$

• Show that the associated equation of motion

$\rho _{0}{\frac {\partial ^{2}{\vec {u}}}{\partial t^{2}}}-\gamma P_{0}{\vec {\nabla }}{\vec {\nabla }}\cdot {\vec {u}}=0$